DIY Unassembled 8600KV Motor FPV Racing Drone

(2 customer reviews)

£207.00 £103.50

SKU: 4000089534205 Categories: , ,


Item Type: Racing Drone Frame

  • Wheelbase: 105 mm / 4.13 inch
  • Arm Plate Thickness: 2 mm / 0.08 inch
  • Weight: 47.9 g / 0.11 lbs

Item Type: Motor

  • KV: 8600KV
  • Lipo cell: 2-3S
  • Max. Con. Current: 13A
  • Max. Con. po wer: 144W
  • Configuration: 9N/12P
  • Motor Resistance: 137mΩ
  • Stator Diameter: 11 mm / 0.43 inch
  • Stator Thickness: 4 mm / 0.16 inch
  • Motor Diameter: 13.8 mm / 0.54 inch
  • Motor Body Length: 11.5 mm / 0.45 inch
  • Overall Shaft Length: 17 mm / 0.67 inch
  • Bolt Holes Spacing: 9 mm / 0.35 inch
  • Bolt Thread: M2

Item Type: F411 OSD Flight Controller

  • Main control chip: STM32F411
  • IMU: MPU6000
  • Integrated Betaflight OSD
  • Firmware: MatekF411
  • SBUS/ IBUS/ for DSMX / UART Shared: UART1-RX
  • BEC: 5V 2A
  • Mounting Hole: 20 mm / 0.79 inch

Item Type: 20A BL_S 4In1 ESC

  • MCU:48MHz EFM8BB21F16G
  • Input Voltage: 2-6S
  • Con. Current: 20A
  • Burst Current: 25A (10S)
  • Mounting Hole: 20 mm / 0.79 inch

Item Type: VTX

  • Output po wer: 25mW
  • Channel: 48CH
  • Input Voltage: 2.9-5.5V
  • SmartAudio: Supported

Item Type: Caddx Beetle V2 Camera

  • Sensor: 1/3 CMOS
  • Horizontal Resolution: 1200 TVL
  • TV System: PAL
  • Image: 4:3
  • Lens: 2.1mm
  • Recommend Battery: 3S 350-450mAh Lipo Battery

Package Includes:

  • 1 x Racing Drone

DIY Unassembled 8600KV Motor FPV Racing Drone
DIY Unassembled 8600KV Motor FPV Racing DroneDIY Unassembled 8600KV Motor FPV Racing DroneDIY Unassembled 8600KV Motor FPV Racing Drone

Additional information

Brand Name




Aerial Photography





Brushless Motor

Charging Voltage


Model Number


Flight Time

as show



Plugs Type

as show

Remote Distance

as show

Control Channels

4 Channels

Controller Battery



as show

Remote Control


Package Includes


Charging Time

as show

Power Source




Age Range

> 14 years old

State of Assembly



Remote Control

Controller Mode


2 reviews for DIY Unassembled 8600KV Motor FPV Racing Drone

  1. E***t

    Pretty awesome little kit. only needed to solder the battery lead and motors! only problem was one of my motor shafts was a bit bent as a defect. but I got it working with another motor and it works well!

  2. D***r

    This is one of my favorite kits. (2nd) There are new changes to this kit. The motors have been improved. The motor shaft is now 2mm instead of 1.5mm (prop shaft is still 1.5mm) and spins way smoother than older model. The camera and VTX has also changed to a more stable and accurate camera, a major improvement on the last camera and a different smart audio 2.0 VTX. The new antanna is not in the best position but will work when assisted by some heat shrink tube or a small rubber band. Using speedy bee to program the VTX will greatly assist you with the VTX tables. The ESC changed too. From a G-H-30 to a G-L-30 this makes flashing for RPM filtering fairly easy. I am not a fan of the orginal bi props so I upgraded. The spacers are better than the last set but I also upgraded to regular vibration dampers. A great VTX upgrade for this kit is the Eachine Nano VTX. It fits in the mount perfectly and makes a massive difference in video range. I also added a small foam helmet to the camera.

Only logged in customers who have purchased this product may leave a review.